• Observe Transmitter Impound Rules
  • Check for warps.
  • All hinges are secure. Pull on control surfaces.
  • Wheel collars are tight and wheels turn freely.
  • Engine is mounted securely and there are no loose engine parts.
  • All servo screws are in place and tight.
  • Servo connections are secure.
  • Receiver and battery are wrapped in foam and secured.
  • CG (Center Gravity) is correct.
  • Minimum of eight fresh rubber bands securing wing.
  • No slop in control surfaces.
  • Proper fuel tubing is used (gas or glow).
  • Check clevis for keepers (pieces of fuel tubing work fine).
  • Check condition of propeller.
  • Card is up on the outer ring of the frequency board before you turn on transmitter.
  • Check trim on transmitter and aircraft.
  • Proper direction on control surfaces.
  • Check throttle.
  • Check receiver antenna for proper routing and transmitter antenna is fully extended and tight.

Upcoming Events

Go to top